Please input two or more words in the search box and click the red question mark or the search button. The search will look for the exact string entered in
the search box and will try to find a match in the item name, item number and item description. So, for example, if you enter XBOX, the search will show all
items where the description / name / item number has the string XBOX in it.
On the search result, click on the item that is the best match and look at the tabs and categories of the item. You can view similar items under that same tab and
You can also refine your search by using the Advanced Search link and limit your search by the criterias in the dropdown lists.
Short Buddy helps you find the short! A system of audible beeps helps you find the problem and permit hands free troubleshooting
Have a dead short? Short Buddy gives you continuous re-set/re-power capability - no more pile of blown fuses
Have an intermittent? While you push, pull, tug and grab wires and harness connectors, Short Buddy is always watching the current level - if the circuit current changes by more than approximately .3 Amps, you’ll hear a loud beep
Settable Amp Levels of 10, 15, 20, 25 and 30 Amps. Automatically opens the circuit in event of overload
Great tool for shorts, intermittent drop outs and flaky grounds and connections - a real time saver
This innovative tester frees up the technicians hands for testing and repair. No need to hold test leads or look at a DMM to locate shorts. Simple, fast installation works in-line with vehicle fuse circuit. Includes blow molded storage case.
• Quickly connects to any vehicle’s EVAP system and works with all smoke machines • Create air-tight seals in seconds • Eliminates the need of searching for the EVAP service port • An essential tool for late model cars with fuel tank rollover valves • Includes 12 sealing disks
OEM Approved for testing vehicle's evaporative emissions (EVAP) System
Two-minute Pass / Fail feature verifies .040" or .020" leaks in OBD-II vehicles
Smoke out OBD-II EVAP codes
Will NOT void OEM factory warranty
All accessories included
Patented UltraTraceUV™ technology deposits a fluorescent dye at the exact location of the leaks. 500 tests per refill. User refillable. A must tool for OBD-II EVAP testing and general purpose leak testing. Nitrogen-based for safe EVAP testing and uses shop-air for general purpose leak testing. Microprocessor technology.
Easy to read backlit Voltmeter allows you to read voltage at the tip eliminating wasted time running to your toolbox for a voltmeter! Standard 4mm jacks ensures full compatibly with our Gold Series Lead Set as well as all other 4mm leads, plugs and jacks already in your tool box. Press the rocker switch forward and you’ll have a hot lead for powering up electrical components like cooling fans, relays, press the switch rearward and you will have an instant ground lead. The polarity tester instantly identifies positive, negative and open circuits. Instantly check continuity of switches, relays and diodes.
Auto Scan feature provides a "one button" activation mode which automatically scans for TPMS sensor communication
Diagnostics uses a make/year/model input which automatically selects the proper sensor communication
Auto Scan and Diagnostics are useful for pre-testing sensors for proper functionality prior to service
Includes vehicle specific Reset Procedures that guide the user through the complete procedure
Easy-to-follow tool menu and graphics clearly show test options
Automatically Selects the Proper Sensor Communication! Activate sensors before tire service is performed, when tires are rotated, and when there is a problem with TPMS. Electronic manuals include critical and comprehensive vehicle set up and reset procedure, along with system descriptions and specifications though 2013 model year.
Includes a TPM tool with latest software subscription including 2013 MY coverage, activation magnet, quick start guide, CD containing all previous and current reset procedure manuals, update cable, CD training video, backup software CD, and a blow molded case.
Also includes relay and component tester. When you connect your Power Probe to the car battery you will have a multitude of testers at your fingertips. With the press of a switch you'll have an instant hot lead or ground lead. Use the probe tip and ground lead simultaneously to power up components right in your hand. Instantly check components for continuity as well as identify positive, negative and open circuits without re-polarizing hook up clips. Locate shorts without wasting fuses.
Designed specifically for circuit testing, Fuse Buddy plugs right into fuse socket - easy connection for circuit current testing
Fuse Buddy will measure circuit amperage from 0 to 20 Amps - time saving design
Unique design incorporates removed fuse to maintain circuit protection
Test range 0 to 20 Amps
.01 Amp resolution
Circuit testing made EASY! The Fuse Buddy Tester connects directly into the fuse socket, measuring from 0 to 20 Amps. No more clumsy connections at the fuse box, adapter fitting plugs directly into fuse socket and stays put. Removed fuse is plugged into the Fuse Buddy maintaining circuit protection. Great for diagnostic troubleshooting and parasitic drains.
Measure rotational speed of gears, motors, engines, fans, compressors, generators, pulleys, grinding wheels, drills, saws and hones extremely accurately
The phototach is equipped with a laser pointer for accurate targeting
Non-contact design results in (zero) torque loss for true precision
The Infrared beam is not affected by ambient light
Low battery indicator
It features a wide measuring range and high resolution, 2.5 to 99,999 RPM, with a large 5 digit display, auto ranging, min/max memory storage. Reflective tape placed on a revolving object can be measured at distances from 2" to 20". The infrared beam makes phototach accurate, convenient, and easy to use. Also the beam is not affected by ambient light. The phototach is the ideal tool for applications where electronic RPM pickup is not available.
The kv/arc quick probe is easy to use: 1) Simply place the probe over the ignition wire 2) Each time the unit detects a spark firing, it will flash the super bright LED strobe indicating a spark-firing event with sufficient arc duration 3) Then press the button and the unit measures and displays peak kV on the LCD display
Tests for no-start conditions and for spark strength
Adjustable gap allows for spark gap requirements from 0 to 40,000 volts
Gauge background makes spark easy to see for accurate measurement
Includes safety shield
When testing for a no-start conditions or spark strength, be sure to have this tool handy. It works on ignition systems from high energy electronic automotive systems to small engines by simulating the spark plug under compression load. It's simple to use and easy to store.
Three Testers in ONE! - 30A Min Fuse, 30A ATC Fuse and 30A All Purpose Amp Meter
Troubleshoot amp draws right at the fuse panel - plugs directly into the fuse socket
Original fuse is replaced in-line during testing, thereby maintaining circuit protection
Unit features deluxe display head with Analog Bar Graph
Improved design over original Fuse Buddy
Improved Fuse Buddy Pro Kit handles both Mini and ATC fuse circuits up to 30 Amps. As an added bonus, the unit includes 30 Amp test clips for all purpose current measuring. This is a great product for reading amp draws at the fuse panel. Measure amp draws on fuel pumps, blower motors and hard to reach a/c compressors, for example.
The 550 is used to check for voltage leaks on the Hybrid car electrical wiring
The 550 can supply 250V, 500V and 1000V test voltages for doing complete insulation testing
CAT III 1000 volt safety rated Digital Multimeter
Large dual display with white LED backlighting
Includes (6) AA batteries, test leads and blow mold storage case
You can not easily test for high voltage leaks to ground without a high volt test source. The 550 can supply 250, 500 and 1000 Volts into a circuit that is leaking to ground. The following parts can leak high voltage to ground: Battery Pack, Power inverter, DC-DC converter, High Voltage AC compressor, Power steering pump. In addition, the 550 can supply 1mA of test current for the capacitance load. It is auto-ranging and can measure up to 2000 MegaOhm with a resolution of 1 K Ohm. Other features include: double injection mold housing, hands free operation via "power lock-on" feature, 200mA small current for continuity test, over range indication and low battery indication. Always use approved safety gloves while testing electrical circuits on Hybrids.
Utilizes cost effective conductance test technology for accurate testing at a value price point
Quick 1-second initial results
Tests charging and starting systems 50-2000 CCA range accurate to 5 CCAs; tests 6V and 12V batteries
Temperature and low charge compensation
Detects and identifies loose leads; supports CCA, IEC, EN, BCI, and DIN scales
Made for the professional technician, the OTC3184 tests batteries and starting/charging systems faster than ever before. The BCS System Analyzer has an operating range of 50-2000 CCA’s and is able to store data in memory or remotely print out the results using an infrared printer interface. It also measures voltage and tests starting and charging systems at the push of a button. 4 line, 20 character LCD display shows CCA’s, voltage, and good/bad status. Displays results in 7 languages: English, French, Spanish, German, Italian, Dutch, Swedish. Built-in infrared printer interface for remote printing (printer not included). Detachable cable leads. Includes BCS system analyzer, a 12' extension cable for in-cab testing, two voltmeter probes, battery side and threaded-post adapters, detachable leads, 9-volt battery and soft-sided carrying case.
Digital pressure and vacuum measurements in a single module
Transducer sealed in 316 stainless steel compatible with variety of liquids and gases
Measures vacuum to 76 cm Hg
Displays results in English (psig of Hg) or metric (kPa or cm Hg) units
This highly accurate pressure transducer measures from 0.5 to 350 psig (3.447 to 2413 kPa) and 0 to 29.9" Hg (0 to 76cm Hg). It's compatible with any automotive fluid, such as oil or coolant, or any gas, such as R-12, R-134A. One-year warranty.
In stock: 14
In stock: 58
In stock: 5
List price: $422.00
List price: $10.89
List price: $510.75
Your price: $336.49
Your price: $8.71
Your price: $407.36
You save: $85.51 (20.26%)
You save: $2.18 (20.02%)
You save: $103.39 (20.24%)
Sell with us. Become an Elizabeth Avenue West Company Affiliate Today! Click below now!
Our Customers Are Our Focus. Tell Us About Your Online Experience.
At ElizabethAvenueWest.com Our Customers Are Our Focus See Why! Let Us Wow You!
Get immediate access to over 1,000,000 name brand gift ideas. We offer monthly special discounts, no payments or interest for 6 months, and FREE SHIPPING ON SELECT ITEMS!
See How We Are Enhancing Customers' Experiences. Read Our Blog!
Shop Elizabeth Avenue West Company L.L.C. l Online Shopping l Official Site
Best Online Shopping Site. Committed to providing you a safe, secure, and a fun online shopping experience. Free Shipping on Select Items. Prices Up to 75% Off. Our Customers Are Our Focus!